G2130 US Type Forged Bolt Type Shackle Surface treatment: Electric galvanized / Hot-dip galvanized Cpacity 1/2 to 150 tons Hot-dip galvanized or electric galvanized Drop forged, quenched and tempered with alloy pins Working load limit permanently shown on every shackle Max proof load is 2.2 times of the working load limited. Min. breaking strength is 6 times or 4 times of the W.L.L as requirement.
G209 US Type Forged Bolt Type Shackle
Made according to Crosby's specification.
Surface treatment: Electric galvanized (grade 4) / Hot-dip galvanized (grade 6)
Cpacity 1/2 to 1200 tons
Sizes 1/2T -25T meet the performance requirements of EN13889:2003
Shackles 25T and larger are RFID EQUIPPED
Drop forged, quenched and tempered, with alloy pins
Working load limit permanently shown on every shackle
Max proof load is 2.2 times of the working load limited.
Min. breaking strength is 6 times or 4 times of the W.L.L as requirement.
Approved for use at -40 degree C (-40 degree F) to 204 degree C (400 degree F)
|Nominal Size (in)||W.L.L.(T)||Dimension(in)|
RIGGING SHACKLES (wire size in Inch):
Shackles are one of the most used rigging fittings. Because the pins are removable, they’re used to make connections to slings, rope, cable, etc. In the category of steel fittings, there are three basic types of rigging shackles:
1. screw pin anchor
2. bolt type safety anchor
3. screw pin chain.
The two basic shapes for shackles are anchor pattern and chain pattern. The anchor pattern shackles are more popular and widely used because of increased area on the inside of the shackle body. This allows for more articulation with the item it is connected to.
If you want to get more information, please feel free to contact with us by below method: